The cashew roaster machine adopts an advanced structure of roller and copy board. After the material enters the cylinder, the cashew nuts are continuously scattered in the hot air flow under the action of the lifting board. In this way, the surface of the cashew particles can be fully in contact with the hot air, so as to achieve the best drying effect.
The machine is mainly composed of a rotary body, lifting plate, transmission device, support device and sealing ring, and other components. It has the advantages of reasonable structure, excellent production, high output, low energy consumption, and convenient operation.
This machine can also be used in the production of compound fertilizers, drying fertilizers with a certain humidity and granularity. At the same time, it can also be used for drying other materials.
The distribution and angle design of the lifting plate of this machine is reasonable, and the performance is reliable. Therefore, the machine has the characteristics of a high utilization rate of heat energy, uniform drying, and fewer times of cleaning materials.
The material of the cashew roasting machine is fed from the higher section of the drum and is in contact with the hot air. As the cylinder rotates, the material flows to the lower end under the action of gravity to be dried and discharged. Since the cashew roaster machine works under negative pressure conditions, the feeding and discharging ends are sealed to avoid air leakage.
The dry wet material is sent to the hopper by the belt conveyor or bucket elevator and then enters the feeding end through the feeding pipe of the feeding machine of the hopper. The inclination of the feeding pipe should be greater than the natural inclination of the material so that the material can flow into the dryer smoothly.
The drum of the cashew nut roaster is a rotating drum that is slightly inclined to the horizontal line. The material is fed from the higher end, and the heat carrier enters from the lower end, and contacts with the material in countercurrent.
There are also heat carriers and materials that flow into the cylinder together. With the rotation of the cashew roaster machine, the material moves to the lower end under the action of gravity.
When the wet material moves forward in the cylinder, it directly or indirectly receives heat from the heat carrier. In this way, the wet material can be dried, and then sent out through the belt conveyor or screw conveyor at the discharge end.
The cashew roaster machine is a cylinder that is slightly inclined in the horizontal direction. The material is fed from the higher end, and the high-temperature hot flue gas and the material flow into the cylinder together.
As the cylinder rotates, the material moves to the lower end due to gravity. The inner wall of the cylinder is equipped with lifting flight, which can lift the materials and scatter them, increasing the contact surface of materials and airflow, in order to improve the drying speed and forward the materials forward. Finally, the dried product is collected from the lower part of the bottom end.
The cashew nut roasting furnace is composed of a heat exchanger, air supply device, baking oven, and other departments. At the same time, it is also special production equipment for braised, salty, salty, and garlic-flavored cashew nuts. In addition, the machine has various systems such as electric heating, coal heating, and gas heating.
If you need a cashew nut roasting machine, please feel free to contact Taizy cashew processing machinery.